Economy Model Shower Timer

$335.00

Price includes free shipping to anywhere in New Zealand !

In stock

Operation of Economy Model Shower Timer

Note: This model is recommended for use where vandalism is not likely, for instance at private homes, hotel/motels, on site cabins at camping parks. Provides shower control for teenagers, overseas students, inconsiderate guests, rain water conservation.

This shower controller is designed as a handyman installation not requiring licensed tradesmen. There is no interference with the water pipes. We recommend that the power be permanently connected to the unit but existing power points such as that used for a ceiling fan can be used without the need or an electrician.

 

Just Briefly

  • Operation identical to standard unit
  • Less expensive than heavy duty unit
  • White polycarbonate box
  • Glass reinforced nylon solenoid

 

What’s Included In Your Purchase ?

  • The Economy Model Shower Timer unit comes with a 12 Volt power pack and solenoid valve for use in New Zealand.
  • Printed instruction manual

How it Works

  • The shower is terminated after a pre-determined time and that is followed by a “discouraging” waiting period during which the shower will not operate
  • The shower and waiting time are pre programmed by the owner from 0-12 mins
  • The shower is terminated after a pre-determined time and that is followed by a “discouraging” waiting period during which the shower will not operate
  • The heavy duty shower timer is best located within the shower area at around eye level for audible and visual efficiency
  • There is a visual display which counts down the minutes and seconds remaining, and is supported by an audible beeper
  • Power is supplied by a 12 Volt power pack that is installed in the ceiling or away from the unit in an adjoining room

Installation

  • The unit is connected via  12 Volt power pack (supplied) that requires a 240 Volt power outlet
  • Assemble and fit the shower timer as per the assembly instructions in the kit
  • For more efficient water utilisation during showers, consider installing a water saving shower head (around 9 L / minute)

Programming

  • Both shower time and waiting time are selected and set by the owner from a number of pre-programmed time options
  • The SHOWER TIME can be selected in whole minutes up to 12 minutes
  • The WAIT TIME can be selected between showers from 0, 15, 30, 60, 120 or 300 seconds
  • The settings can only be changed by first removing the power source
  • Power failure will not change the settings
  • In the normal condition the settings can be seen at a glance because the visual display indicates the two settings alternately for three seconds each
  • The SHOWER TIME setting is displayed as a steady glow and the WAIT TIME flashes

Operation

  • Press the Start button momentarily to begin the shower time sequence. This will be confirmed by a beep from the buzzer.
  • Hot and cold water taps still control the temperature and water flow, like you would normally use
  • The visual display indicates the remaining shower time in minutes.
  • At each minute change, the buzzer beeps once.
  • From 99 seconds, the display indicates remaining seconds.
  • At each of 30, 20, 10, 5, 4, 3, 2 and 1 seconds remaining, the buzzer beeps once.
  • The water is then cut off and the flashing visual display indicates the remaining Waiting time.
  • Pressing the button at any time during the SHOWER TIME or WAIT TIME has no effect.

Progress Monitoring

  • Visual progress monitoring is provided by displaying the remaining time in minutes and seconds
  • This is supported by audible signals from an electronic buzzer
  • The audible signals indicate increasing urgency until the timer ultimately shuts off the water supply to the shower
  • The waiting time period then commences and is reported by the visual display
  • The visual and audible signals are similar to that used in a microwave oven

 

Important Note: The shower head is not supplied.

You can usually use your existing shower head with the shower timer or save more water by replacing it with a water saving shower head!

Additional information

Weight0.3 kg
Dimensions15 × 11 × 3 cm